Free US shipping on $40+ · Printed to order in the USA

Size Guide

All measurements come from the makers of our blank items. They’re measured flat, not stretched. Real pieces can be a little off: about half an inch on covers and about 1.5 in on tees and hoodies.

Prosthetic leg cover

Our covers are for the outside of a below-knee prosthesis. Never over a knee joint or anything that bends.

Measure your socket

Measure the prosthesis the way you wear it. The cover goes on over everything else, so that’s the shape it has to go over.

  • Put your prosthesis on the way your prosthetist showed you, with your liner, socks and suspension sleeve as usual.
  • Find the widest part of the socket. Wrap a soft tape measure around it, level and snug, and read the number. If the cover will go over your suspension sleeve, measure over the sleeve. That’s your circumference.
  • Now measure the length you want covered, from where the cover should start to where it should stop.
  • No soft tape? Wrap a piece of string, mark it, then lay it along a ruler.
  • The back of a socket is hard to see while you’re wearing it. A friend or a mirror helps.

Cover sizes

“Around (relaxed)” is the flat width doubled. That’s the size of the tube before it stretches.

SizeFlat widthAround (relaxed)Length
S8.25 in (21 cm)about 16.5 in (42 cm)15 in (38 cm)
M9 in (23 cm)about 18 in (46 cm)16.5 in (42 cm)
L9.5 in (24 cm)about 19 in (48 cm)17.5 in (44.5 cm)

Between sizes, or is your socket’s widest point over 19 in? Email hello@loudlimb.com your numbers before you order.

What the numbers mean

  • The fabric is 90% polyester and 10% elastane, and it stretches in every direction. The maker doesn’t publish a maximum stretch, so we can’t tell you how far past the numbers above it will go.
  • Where your socket is smaller than a size’s relaxed circumference, the cover doesn’t have to stretch there, so it may be loose.
  • Where your socket is bigger, the cover has to stretch. The inside of the fabric is white, so a print pulled very tight can look lighter.
  • If your socket is longer than the cover, it covers part of it. If it’s shorter, fold or bunch the extra.

Putting it on

  • Put your prosthesis on the way your prosthetist showed you, with your liner, socks and suspension sleeve as usual.
  • Pull the cover on last, over the outside.
  • Never put the cover under a suspension sleeve. It never goes inside the socket either.
  • Keep it clear of valves, pin-lock release buttons, lanyards and any part that bends or moves.
  • If anything changes how your prosthesis feels or moves, take the cover off and ask your prosthetist.

Crew socks

One size, sold as a pair. The maker says they fit women’s US 5 to 15 and men’s US 3 to 13. Black heel and toe.

SizeLength, flatWidth, flat
One sizeabout 15.5 in (39 cm)about 3.3 in (8.4 cm)

Unisex tee (Bella+Canvas 3001)

Width is measured flat across the chest. Sleeve is the short sleeve’s length. Sizes S to 3XL.

SizeWidthLengthSleeve
S18 in (46 cm)28 in (71 cm)8.9 in (22.6 cm)
M20 in (51 cm)29 in (74 cm)9.2 in (23.4 cm)
L22 in (56 cm)30 in (76 cm)9.5 in (24.1 cm)
XL24 in (61 cm)31 in (79 cm)9.7 in (24.6 cm)
2XL26 in (66 cm)32 in (81 cm)10 in (25.4 cm)
3XL28 in (71 cm)33 in (84 cm)10.4 in (26.4 cm)

Unisex hoodie (Gildan 18500)

Width is measured flat across the chest. Sleeve is measured from the center of the back to the cuff. Sizes S to 5XL.

SizeWidthLengthSleeve
S20.1 in (51 cm)27.2 in (69 cm)33.5 in (85 cm)
M22 in (56 cm)28 in (71 cm)34.5 in (88 cm)
L24 in (61 cm)29.1 in (74 cm)35.5 in (90 cm)
XL26 in (66 cm)29.9 in (76 cm)36.5 in (93 cm)
2XL28 in (71 cm)31.1 in (79 cm)37.5 in (95 cm)
3XL29.9 in (76 cm)31.9 in (81 cm)38.5 in (98 cm)
4XL31.9 in (81 cm)33.1 in (84 cm)39.5 in (100 cm)
5XL33.9 in (86 cm)33.9 in (86 cm)40.5 in (103 cm)

Tee and hoodie tip

Lay a tee or hoodie you like flat and measure it the same way. Pick the size with the closest numbers. Between two sizes? Go up for a looser fit.

Wrong size anyway?

Covers, tees and hoodies get one size swap per order. We print the new size, and you pay $4.99 standard shipping for it. See the returns page.