Prosthetic leg covers: measure first, with your prosthesis on the way you wear it.
- A. Around: wrap a soft tape around the widest part of the socket, level and snug, over everything the cover will go over.
- B. Length: from where the cover should start to where it should stop.
Short answer: Our printed covers go on the outside of a below-knee prosthesis and come in three sizes. Relaxed, S is about 16.5 in (42 cm) around and 15 in (38 cm) long, M is about 18 in (46 cm) around and 16.5 in (42 cm) long, and L is about 19 in (48 cm) around and 17.5 in (44.5 cm) long. To choose, put your prosthesis on the way you wear it, wrap a soft tape measure around the widest part of the socket, then measure the length you want covered. Compare both numbers with the chart below. Between sizes, or over 19 in around? Email us your numbers before you order.
All measurements come from the makers of our blank items. They’re measured flat, not stretched. Real pieces can be a little off: about half an inch on covers, about 1 in on long sleeve tees and kids tees, and about 1.5 in on tees, sweatshirts and hoodies.
Prosthetic leg cover
Our covers are for the outside of a below-knee prosthesis. Never over a knee joint or anything that bends.
Measure your socket
Measure the prosthesis the way you wear it. The cover goes on over everything else, so that’s the shape it has to go over.
- Put your prosthesis on the way your prosthetist showed you, with your liner, socks and suspension sleeve as usual.
- Find the widest part of the socket. Wrap a soft tape measure around it, level and snug, and read the number. If the cover will go over your suspension sleeve, measure over the sleeve. That’s your circumference.
- Now measure the length you want covered, from where the cover should start to where it should stop.
- No soft tape? Wrap a piece of string, mark it, then lay it along a ruler.
- The back of a socket is hard to see while you’re wearing it. A friend or a mirror helps.
Print the measuring guide (PDF): one page with the diagram, these steps, the cover sizes and space to write your numbers.
Cover sizes
“Around (relaxed)” is the flat width doubled. That’s the size of the tube before it stretches.
| Size | Flat width | Around (relaxed) | Length |
|---|---|---|---|
| S | 8.25 in (21 cm) | about 16.5 in (42 cm) | 15 in (38 cm) |
| M | 9 in (23 cm) | about 18 in (46 cm) | 16.5 in (42 cm) |
| L | 9.5 in (24 cm) | about 19 in (48 cm) | 17.5 in (44.5 cm) |
Between sizes, or is your socket’s widest point over 19 in? Email hello@loudlimb.com your numbers before you order.
Cover size finder
Measured your socket with the steps above? Type in your two numbers and we compare them with the cover sizes in the table.
Compare your numbers with the cover sizes table above.
What the numbers mean
- The fabric is 90% polyester and 10% elastane, and it stretches in every direction. The maker doesn’t publish a maximum stretch, so we can’t tell you how far past the numbers above it will go.
- Where your socket is smaller than a size’s relaxed circumference, the cover doesn’t have to stretch there, so it may be loose.
- Where your socket is bigger, the cover has to stretch. The inside of the fabric is white, so a print pulled very tight can look lighter.
- If your socket is longer than the cover, it covers part of it. If it’s shorter, fold or bunch the extra.
Putting it on
- Put your prosthesis on the way your prosthetist showed you, with your liner, socks and suspension sleeve as usual.
- Pull the cover on last, over the outside.
- Never put the cover under a suspension sleeve. It never goes inside the socket either.
- Keep it clear of valves, pin-lock release buttons, lanyards and any part that bends or moves.
- If anything changes how your prosthesis feels or moves, take the cover off and ask your prosthetist.
Which chart fits your limb difference
Our covers fit one kind of leg. Everything else we sell is regular clothing for anyone, at any limb level. Find your row, then use the chart it points to.
| Your limb difference | What fits from us | What to measure |
|---|---|---|
| Below-knee prosthesis | A cover in S, M or L, plus any of our clothing | Around the widest part of the socket, with the prosthesis on the way you wear it, and the length you want covered. Then check the cover sizes. |
| Below-knee prosthesis with a foam cosmetic cover | A cover, over the foam | Around the foam at its widest point, and where you want the fabric to end. |
| Below-knee prostheses on both legs | A cover for each leg | Measure each socket on its own and pick a size for each leg. |
| Above-knee prosthesis | No cover. Socks, shorts, tees, long sleeve tees, sweatshirts, hoodies and hats | The clothing charts below. Our covers never go over a knee joint or any part that bends, locks or moves. Some other makers offer covers for above-knee legs, usually made to measure with your prosthetist, so follow that maker’s guide. |
| Leg amputation, no prosthesis | Socks, shorts, tees, long sleeve tees, sweatshirts, hoodies and hats | The clothing charts below. Socks come in pairs: wear one and keep one as a spare. |
| Arm or hand limb difference, with or without a prosthesis | No cover. Tees, long sleeve tees, sweatshirts, hoodies, socks, shorts and hats | Lay a top you already own flat and compare it with the charts below. |
| A child’s prosthesis | We don’t make a child size of cover. Kids tees come in youth sizes XS to XL | Our smallest cover is S, and we can’t promise it will fit a child’s prosthesis. Measure the socket the same way and email us the numbers before you order. |
For the full step-by-step, with where the cover should end and the measuring mistakes to avoid, read How to Measure a Prosthetic Leg. For pants, the empty pant leg and shoes, see Adaptive Clothing for Amputees.
Crew socks
One size, sold as a pair. The maker says they fit women’s US 5 to 15 and men’s US 3 to 13. Black heel and toe.
| Size | Length, flat | Width, flat |
|---|---|---|
| One size | about 15.5 in (39 cm) | about 3.3 in (8.4 cm) |
Unisex tee (Bella+Canvas 3001)
Width is measured flat across the chest. Sleeve is the short sleeve’s length. Sizes S to 3XL.
| Size | Width | Length | Sleeve |
|---|---|---|---|
| S | 18 in (46 cm) | 28 in (71 cm) | 8.9 in (22.6 cm) |
| M | 20 in (51 cm) | 29 in (74 cm) | 9.2 in (23.4 cm) |
| L | 22 in (56 cm) | 30 in (76 cm) | 9.5 in (24.1 cm) |
| XL | 24 in (61 cm) | 31 in (79 cm) | 9.7 in (24.6 cm) |
| 2XL | 26 in (66 cm) | 32 in (81 cm) | 10 in (25.4 cm) |
| 3XL | 28 in (71 cm) | 33 in (84 cm) | 10.4 in (26.4 cm) |
Unisex long sleeve tee (Gildan 2400)
The maker says this tee runs smaller than usual, so check the chart before you pick a size. Lay a long sleeve tee you already own flat and compare. Width is measured flat across the chest, armpit to armpit. Sleeve is the sleeve length the maker lists. Black comes in S to 5XL, Sport Grey in S to 3XL.
| Size | Width | Length | Sleeve |
|---|---|---|---|
| S | 18 in (46 cm) | 28 in (71 cm) | 25 in (64 cm) |
| M | 20 in (51 cm) | 29 in (74 cm) | 25.5 in (65 cm) |
| L | 22 in (56 cm) | 30 in (76 cm) | 26 in (66 cm) |
| XL | 24 in (61 cm) | 31 in (79 cm) | 26.5 in (67 cm) |
| 2XL | 26 in (66 cm) | 32 in (81 cm) | 27 in (69 cm) |
| 3XL | 28 in (71 cm) | 33 in (84 cm) | 27.5 in (70 cm) |
| 4XL | 30 in (76 cm) | 34 in (86 cm) | 28 in (71 cm) |
| 5XL | 32 in (81 cm) | 35 in (89 cm) | 28.5 in (73 cm) |
Unisex crewneck sweatshirt (Gildan 18000)
Width is measured flat across the chest, armpit to armpit. Sleeve is measured from the center of the back to the cuff. Sizes S to 3XL, in Black and Sport Grey.
| Size | Width | Length | Sleeve |
|---|---|---|---|
| S | 20 in (51 cm) | 27 in (69 cm) | 33.5 in (85 cm) |
| M | 22 in (56 cm) | 28 in (71 cm) | 34.5 in (88 cm) |
| L | 24 in (61 cm) | 29 in (74 cm) | 35.5 in (90 cm) |
| XL | 26 in (66 cm) | 30 in (76 cm) | 36.5 in (93 cm) |
| 2XL | 28 in (71 cm) | 31 in (79 cm) | 37.5 in (95 cm) |
| 3XL | 30 in (76 cm) | 32 in (81 cm) | 38.5 in (98 cm) |
Unisex hoodie (Gildan 18500)
Width is measured flat across the chest. Sleeve is measured from the center of the back to the cuff. Sizes S to 5XL.
| Size | Width | Length | Sleeve |
|---|---|---|---|
| S | 20.1 in (51 cm) | 27.2 in (69 cm) | 33.5 in (85 cm) |
| M | 22 in (56 cm) | 28 in (71 cm) | 34.5 in (88 cm) |
| L | 24 in (61 cm) | 29.1 in (74 cm) | 35.5 in (90 cm) |
| XL | 26 in (66 cm) | 29.9 in (76 cm) | 36.5 in (93 cm) |
| 2XL | 28 in (71 cm) | 31.1 in (79 cm) | 37.5 in (95 cm) |
| 3XL | 29.9 in (76 cm) | 31.9 in (81 cm) | 38.5 in (98 cm) |
| 4XL | 31.9 in (81 cm) | 33.1 in (84 cm) | 39.5 in (100 cm) |
| 5XL | 33.9 in (86 cm) | 33.9 in (86 cm) | 40.5 in (103 cm) |
Shorts
Athletic shorts in a men’s cut, with a white drawstring and no pockets. Waist and hip widths are measured flat, straight across. Inseam is the length of the inside leg seam. Sizes XS to 2XL. Measured flat by the maker. Real pieces can vary a little.
| Size | Waist width | Hip width | Length | Inseam |
|---|---|---|---|---|
| XS | 15 in (38 cm) | 17.5 in (44.5 cm) | 18.1 in (46 cm) | 9.1 in (23 cm) |
| S | 16 in (40.5 cm) | 19 in (48.5 cm) | 20.3 in (51.5 cm) | 10.2 in (26 cm) |
| M | 18 in (45.5 cm) | 21 in (53.5 cm) | 21 in (53.5 cm) | 10.5 in (26.5 cm) |
| L | 19 in (48.5 cm) | 22.5 in (57 cm) | 21.6 in (55 cm) | 10.8 in (27.5 cm) |
| XL | 21 in (53.5 cm) | 24 in (61 cm) | 22 in (56 cm) | 11 in (28 cm) |
| 2XL | 22 in (56 cm) | 25 in (63.5 cm) | 22.5 in (57 cm) | 11.2 in (28.5 cm) |
Kids tee (Gildan 5000B)
Youth sizes XS to XL. Width is measured flat across the chest. Sleeve is measured from the center of the back to the cuff.
| Size | Width | Length | Sleeve |
|---|---|---|---|
| XS | 16.1 in (41 cm) | 20.5 in (52 cm) | 13.4 in (34 cm) |
| S | 16.9 in (43 cm) | 22 in (56 cm) | 14.2 in (36 cm) |
| M | 18.1 in (46 cm) | 23.6 in (60 cm) | 15.4 in (39 cm) |
| L | 18.9 in (48 cm) | 25.2 in (64 cm) | 16.1 in (41 cm) |
| XL | 20.1 in (51 cm) | 26.4 in (67 cm) | 17.3 in (44 cm) |
Trucker hat (OTTO Cap 39-165)
One size, with an adjustable plastic snap. The maker lists about 24 to 26 in (61 to 66 cm) around. The crown is about 6 in (15 cm) tall, and the front panel about 3 in (7.5 cm) tall. To check, wrap a soft tape measure around your head where a cap sits, about an inch above your eyebrows and ears.
Tip: measure one you already own
Lay a tee, sweatshirt, hoodie or pair of shorts you like flat and measure it the same way. Pick the size with the closest numbers. Between two sizes? Go up for a looser fit.
For prosthetists, clinics and support groups
If your patients or members ask about printed covers, you’re welcome to print our one-page measuring guide (PDF) and hand it out. It has the diagram, the measuring steps, the three cover sizes and space to write the numbers. Please share it as it is.
The short version, for a handout or a resources page:
- Put the prosthesis on the way it’s worn, with the liner, socks and suspension sleeve as usual.
- Wrap a soft tape measure around the widest part of the socket, level and snug. If the cover will go over the suspension sleeve, measure over the sleeve.
- Measure the length to be covered, from where the cover should start to where it should stop.
- Compare with the chart. Relaxed, S is about 16.5 in (42 cm) around and 15 in (38 cm) long, M about 18 in (46 cm) and 16.5 in (42 cm), L about 19 in (48 cm) and 17.5 in (44.5 cm). Between sizes, or over 19 in around: email hello@loudlimb.com before ordering.
From the Loud Limb size guide, loudlimb.com/size-guide/
Our covers are decorative apparel, not a medical device. They go on the outside of a below-knee prosthesis only, never inside the socket or under a suspension sleeve. If anything changes how a prosthesis feels or moves, take the cover off and ask the prosthetist.
Wrong size anyway?
Covers, tees, long sleeve tees, crewneck sweatshirts, hoodies, shorts and kids tees get one size swap per order. On a cover, we print the new size free and you pay only the $5.99 standard shipping. A new size is $26.99 for a tee, $29.99 for a long sleeve tee, $38.99 for a crewneck sweatshirt, $46.99 for a hoodie, $48.99 for shorts and $21.99 for a kids tee, standard shipping included. Crew socks and trucker hats come in one size, so they can’t be swapped. See the returns page.